The new app for NXi is going beta. Please let me know your Apple ID if you want to beta test the app. New features of the app are as below:
- PFD & MFD in the same app
- Reversionary mode available
- Traffic map available
- The new HSI map on the PFD
- Active COM name on the PFD
- The new vertical situation display on the MFD
- Arrival airport runway extension line
- OBS line is now extended to 500NM on each side
- Fully utilizing the NXi UI
Congratulations!! We have been looking forward to this.
I just sent you an email with my Apple ID 😉
I’ll help! Email rdale@skywatch.org
I have been looking forward to this! I would love to help with the new build.
Li Chen, just a heads-up that to install the app in both the PFD and MFD bezels, you need to send 2 different invitations. When I tried to install it on the iPad in the second bezel, I got a message that the invitation had already been redeemed.
The above is wrong. Once you have used the link Li Chen sent you to instal both TestFlight and the NXI app in one go on one iPad, you cannot use the link to install them again on a second iPad, BUT if you download TestFlight directly on the second iPad from the Apple App Store, it will I automatically offer to download and install the NXi app on this second iPad.
I’m flying a G1000 NXi C172S and would love to help
Really been looking forward to this! Can I sign up to be on the beta?
I Sent a message to li Chen with my Apple ID
Please invite me to beta testing
Sent a message with my Apple ID
Would love to help test the app
My Apple ID is
dixavado@gmail.com
Thanks and have an awesome year.
Thanks, everyone. I’ve sent the invitation of beta testing to all your email addresses.
Please send me an invite to beta test. I would be glad to help!
Please send me an invite to beta test. I purchsed both apps, and I would love to try this new one.Thanks.
I would love to be able to test this app out and help in any way!
My apple id is rljcolorado18@gmail.com. I have been using the G1000 PFD/MFD since 2020.I use it with MSFS 2020. I would like to beta test your new NXi. I have been in flight simming since Xplane 9 was released.
Would love to help & test, Apple ID is melvin@sleek.media
I would also love to test. My apple ID is bverst@gmail.com – I’m a happy user of your MFD and PFD apps. Fly a G1000 (not NXI though) in real life.
hi.
I would love to test it
my apple ID is carldg@outlook.com
Hi SIMiONIC team,
Greetings from Portugal.
I would love to participate in the testing of the G1000 NXi beta version. I’ve sent a message with my Apple ID.
Thanks,
Tiago
Sent a message in the contact form, can’t wait to see what’s new and give feedback! This is perfect for mixed reality setups given the current MSFS limitations
Is there any chance I could test? I just got my g1000 bezel today? Thank you.
Paguilerag@gmail.com
Just a question, in order to practice IFR, it is some way to get the track of the entire flight?
There is no flight data recording in the app.
I’d like to try it !
wonbin_21@naver.com is my apple ID
I would like to involved in beta testing.
trainman1206@gmail.com is Apple ID
I really want to test this g100 nxi
I would like to involved in beta testing. Was incorrect Apple ID. This is the correct one.
Hi! Awesome work for the NXi. Would love to be a beta tester!
Apple ID: chuminhtesla@gmail.com
Thank you!
So far, I love the beta! Have had a few crashes when I use the MFD and PFD together. For some reason the MFD likes to crash in mid-flight, and often continues to do so when I re-launch the app and connect with the PFD on my apple iPad Pro…but I let it sit for a few minutes, and it seems to work Ok after that.
A few nice features to add if you have time are:
-go around button interface for xplane; when you select to go around, the Nxi auto pilot keeps flying the approach but the g1000 on xplane goes around
-Some of the newer planes are equipped with electronic stability protection. Is it possible to work this into the Aux page on the MFD and the autopilot/FD interface?
Otherwise, I am grateful to try this out. My fellow G1000 pilots are envious!
Hi, Li Chen.
I have a 1 to 1 Cessna 172 and would love to try the G1000 nxis!
Apple ID is oliversunay@icloud.com
This is nice. Thanks.
Saad.azmi.1974@gmail.com
Hi Li,
I would love to beta test the nxi, if you are still looking for more testers.
My ID is guillaume.ameline@gmail.com
Congratulations for coming so far!
Hi Ameline, thanks for help. The NXi app was disappeared from App Store days before. After have contacted Apple’s support, It just came back today. Mike told me about this. I’ve added you in.
Hello Li,
Is it still possible to sign-up to beta test the NXi? My ID is bjcarroll-mobile@telusmail.net . And congratulations on what looks to be another excellent product! Brian
Sure.
Have been testing new NXI App over the past three days in various combinations either with just 1 iPad or both. Quite significant crashes at various stages of flight either on ground while programming Flight Plans and airborne also whilst using 2 ipads in my setup, Also with the same set up marrying the two together is achievable by going through a couple of swipes in both iPads between PFD AND MFD modes then everything seems to work fine. Altitude in altitude tape differs more than 1000ft with the sim altitude only when real weather is set but in clear skies setting altitudes match whatever the baro setting. Whilst in flight too only the MFD would crash once every ten to 20 minutes after an hour getting airborne in a 2-3hr flight. Restarts were quick and successful without losing saved flight plans, ncte active flight plans unsaved will be lost (found out only by just activating without storing it) more to comment on later.
I also sent Li the developer info on crashes etc and my thoughts on the use and performance of the “2in1” apps whether used in 2ipads or just one, with minimal crashes when using 1ipad and the other iPad used with Navigraph. But I pretty much think he’s getting crash data as it happens through TestFlight with both setups and anyone else who’s in the beta testing programme. I have been in flight over an hour now and no crashes whilst using just the left iPad, did notice while in gps mode but using simulator APilot there’s a .01nm deviation either left or fight off course per 5-6 seconds. But when I use the Simionic APilot it flies the gps track no problem and do notice the flight sim track deviates from course line by that same amount until I reach the next waypoint then it all ties up to match again. As with the original apps while flying using the app APilot there is a track hunting/chasing taking place until flying the desired track either in VOR OR GPS OR ILS modes.
Not a fault but a question. When using flight sim nxi gauges the course lines for navigation as depicted on their screens have a curved track prior to a waypoint so that the aircraft follows that track between that waypoint or fix towards the next waypoint or fix and not overfly that waypoint as opposed to the default G1000 apps or beta G1000NXI apps where tracks between waypoints are acutely angled and the aircraft overlies the waypoints. No real drama really as whichever APilot I use the performance between the two although not the same but similar is acceptable but was expecting the same visual track patterns (curved tracks)as depicted in the sim. A lot of the features though in your new apps are great to explore and test.
Pingback: The Complete G1000 Flight Sim Hardware Panel Guide (2024 Edition)
HI, I’m a bit late to the party but if you can add smgvbest@gmail.com to the beta I would appreciate it.
Sandra
Hi, I thought I posted my interest in joining in on the beta but I’m not seeing it here. can you add smgvbest@gmail.com
Sandra
Sent a request to join the beta via the Contact Us page as I did not want my Apple ID public on here.
I would like to request access to the beta as well. I have sent my Apple ID via the Contact Us form so as not to expose it publicly here. Thank you.
Dan
Hi SIMiONIC team,
Greetings!
I would love to participate in the testing of the G1000 NXi beta version. Donavan.Lane@outlook.com
Thanks,
Donavan
Private message sent for beta testing. Thank you.
When do you expect this to be released to the rest of your customers as the new mainstream product? Another question… Is it currently possible, and/or will it be possible to run 2 PFD’s along with a 3rd MFD for a two seat, triple screen glass cockpit setup? I am also curious about why you integrated the two apps into a single application. What are the advantages? It seems that this might present a memory limitation, since both apps now have to share the same memory limit.
Is the beta still open? If so, I would be very interested in supporting you. My Apple ID is the email address used to create this comment.
Hello. I will be glad to help with testing your new app. My Apple ID si spillar38@gmail.com
Also i can support you with some money for your app.
Was just about to purchase both apps, feel free to invite me please to provide feedback and test the app as I am flying nearly every day. Email used in the comment is Apple ID. Thanks, Tom.
Is ADF source currently not supported on the NXi beta bearing indicators ? (Bearing 1, Bearing 2). When ai cycle through the sources ADF does not appear. It just cycles through Nav 1, Nav 2, GPS.
Not for now. I’ll add it.
Many thanks.
The NXi app is superb but unfortunately largely not useable for flight training without ADF because the approaches (UK at least) so often involve either an ADF hold or the ADF forms part of the missed approach procedure (even if it’s an RNP approach).
Will add ADF and visual approach soon.
Hi Li, please count me into the beta group, ID: theelean@yahoo.com.au
Hello Li. I finally can test your app but i have problem with installation your Bridge app to my PC. I try stop firewall, try stop Avast antivirus but nothing help. I have windows 11. I really dont know how to solve it.
Hi Li,
i would like to participate on this Beta testing, if it is still possible. I mostly fly Cessna 172 so I am very excited about this app. ID: erik5@centrum.sk
Thank you
Count me in for the beta email@stevenlevitt.com
Hello I want to test this please ifly2u@gmail.com is my Apple ID
Count me in for beta please
Peter@norval.uk
EDIT to EARLIER MESSAGE (April 20, 2024, Re; NXI release). I appear to be WRONG about this — that is, my questions about the new NXi version and use.
It appeared as being available on my App Store for my Mac — it DOES NOT list as being available when I check using my iPad App Store. Sorry for the confusion, and Li, please disregard my earlier post here and questions,
Brian
Yes, the iPad version was rejected by the AppStore reviewer. Took me sometime to make it in the store. Thanks for checking this, Brian!
Hi Li, i have been using your G1000 bezels for a long time now, and bought the new NXi, the PFD runs great but the MFD keeps getting disconnected.
i updated everything but it still disconnects from the PFD, please let me know what i can do…. thank you.